Moving, racking, stacking, loading and unloading pallets, with nine models covering everything from horizontal transport to lifting to 8.5 metres and loads of 1.4 to 2 t. There are four types: pallet movers, stackers, reach trucks and counterbalance forklifts, and all forklifts are omnidirectional. They identify pallets with 3D vision, calculating in real time where the fork openings are, how far the pallet is turned and how high it is, then adjust their approach automatically.
Manufacturer: Wuxi Jiangsong Robot Co., Ltd., 178 Changjiang East Road, Xinwu District, Wuxi, Jiangsu, China. Sales: +86 18168891000. Email: gggtakqqq@foxmail.com. Request a quote.
JS-F SERIES · AUTONOMOUS FORKLIFT
Pallet movers, stackers, reach trucks and counterbalance forklifts: nine models from 1.4 to 2 t, from horizontal pallet transport to lifting to 8.5 m. 3D vision finds the fork openings, how far the pallet is turned and how high it is, and the forklift adjusts its approach automatically.
POSITIONING
For horizontal transport only, a pallet mover; for racking, a stacker or reach truck depending on the height; for loads placed close together on the floor or for loading trucks, a counterbalance forklift. Racks with an open underside that are moved whole are better handled by underride robots.
WHERE IT RUNS
{{ u.desc }}
KEY MODELS
Lifts pallets off the floor for horizontal transport, without stacking; for three-runner pallets, floor storage transfers and pallet delivery to lines.
A pallet mover for perimeter-base pallets: its wheels retract while picking up and lower once inside, so it handles pallets that standard pallet movers cannot enter.
Lifts pallets onto racks. Lift stroke 90 to 1,600 mm, up to 3,500 mm; right-angle stacking aisle 2,340 mm (1200 × 1200 pallet).
A 2-tonne stacker. Lift stroke 2,500 mm, up to 4,500 mm; right-angle stacking aisle 2,800 mm (1200 × 1200 pallet).
The forks extend forwards; reach trucks are the choice for high racking in narrow aisles.
A counterweight at the rear and no support legs: it picks up loads placed close together on the floor and loads trucks, and takes both pallet types, but needs more space and wider aisles.
FULL RANGE
Standard pallet movers take only three-runner pallets (nine-block pallets count as three-runner): the wheels under the forks must reach under the pallet, and a perimeter-base pallet is closed all round at the bottom. For perimeter-base pallets, the dedicated JS-F2000-SPT raises its wheels while picking up and lowers them once inside. Counterbalance forklifts have no support legs and take both types, but need more space and wider aisles.
FOUR TYPES
{{ t.desc }}
SELECTION
{{ s.desc }}
QUICK REFERENCE
Choose the lift height for the highest rack position. Oversizing for a possible future increase often costs more and brings limitations everywhere, and the higher the lift, the more conservative the load must be.
SAFETY
{{ s.desc }}
SITE CONDITIONS
These dimensions are measured during the survey; any site modifications and their cost are made clear at the latest in the formal quotation, not added during installation.
CHARGERS
{{ c.fit }}
High-current and low-current chargers must not be mixed. The number usually follows a rule of thumb: a quarter of the number of vehicles for one shift, a third for two shifts and a half for continuous three-shift operation, with at least 2.
MAINTENANCE & SPARES
{{ m.v }}
RELATED READING
FAQ
It depends how the materials are held. Pallets call for autonomous forklifts; racks moved whole call for underride lifting. Where there are both, one dispatch system manages them together.
Its 3D vision recognises wooden pallets, plastic pallets and steel cages. For cage trolley flows in parcel and e-commerce operations with 1,800 mm aisles, use the JS-U0800-SLF cage trolley robot, whose omnidirectional chassis picks up and sets down directly without reversing.
By the highest rack position, without oversizing for a possible future increase; a higher lift means a more conservative load. A requirement such as “lift 8 m and carry 1.5 t” is often a combination of worst cases: put heavy goods low and light goods high; use one model for 6 to 8 m and standard products below 6 m, with the dispatch system assigning tasks in batches.
No. In the 24 V forklift series, pallet movers use the JS-CHR-ACE2750-SR and stackers and larger models the JS-CHR-ACE27100-SR; high-current and low-current chargers must not be mixed.
Fully loaded forklifts need gradients within 3%. Where a ramp is steeper, it can be lengthened and made gentler with a non-slip surface, or that position can use a different docking method that avoids the ramp; which one is set out in the proposal after the survey.
Generally yes, but an extra algorithm tuning step is needed, with its time and cost listed separately in the proposal. If possible, send a couple of photos first so our engineers can assess it.
NEXT STEP
Those three decide the vehicle type. Add trips per hour and the shift pattern, and we can work out the number of vehicles and chargers.
TO QUOTE THIS, WE NEED
Thank you. Our engineers will review the site conditions you sent and reply within one business day.
Urgent? Call +86 18168891000 directly.
Your mail app has opened with the enquiry filled in. Press Send to deliver it to gggtakqqq@foxmail.com.